ALSAN 075 is a PMMA based, highly flexible, fibre-filled waterproofing product for sealing minor penetrations, e.g. screws. It allows these penetrations to be waterproofed and incorporated safely into the main waterproofing system.

Long description, Frame of uses, Advantages

- reliable incorporation of small, geometrically complex shapes in the seamless Alsan waterproofing system
- highly flexible, even at extreme sub-zero temperatures
- permanently weather-resistant (UV-, hydrolysis- and alkali-resistant)
- fully bonded to the substrate, therefore no flow paths for water
- easy and fast application
- fast-curing
- can be applied at sub-zero temperatures
- suitable for most substrates, including variable substrates (when combined with Alsan Primers)
- solvent-free

ALSAN 075 standard colour: RAL 7032

Needed tools, installation instructions

First stir the tub contents thoroughly.
Then add the catalyst while stirring at the slow-speed setting and mix for 2 minutes.
Make sure that the product on the base and sides of the container is mixed in.
At product temperatures < 10 °C the product should be stirred for 4 minutes, as the catalyst will take longer to dissolve.

With a brush, apply a thick layer to the detail to be waterproofed and smooth over.
Make sure that a layer thickness of at least 1.5 mm is achieved in all areas.
If necessary, apply a second layer once the first one has hardened.

Physico-chemical-thermical performances

ALSAN 075 (at 20 °C, 3% catalyst)
- Pot life approx. 15 minutes
- Rain proof after approx. 30 minutes
- Can be walked on / over coated after approx. 45 minutes
- Curing time approx. 2 hours

Filling 2 kg/m²/mm

Unit of packaging, dimensions, volume, weight

5 kg ALSAN 075
10 kg ALSAN 075

Store in original sealed packaging and in a cool, dry and frost-free place.
Avoid warm storage areas (> 30 °C) even for brief periods, for example on site.
Consequently the products must not be exposed to direct sunlight or kept in a vehicle.
Unopened products have a shelf life of at least 12 months.
After removing some of the contents, reseal the containers so they are airtight.

Sample request

  • This field is for validation purposes and should be left unchanged.