Adhesive produced on elastomeric base in a solvent based solution, single-component, liquid with low viscosity, resistant to water, specially formulated to bond PVC-P waterproofing membranes.

Needed tools, installation instructions

The adhesive can be spread and levelled using a toothed brush or another similar tool, considering about 300-500 g/m2 on the whole surface of the two layers to be glued. After verifying the status of stickiness, couple the two layers exerting on them a pressure by metal
or rubber roll. The setting of the adhesive is immediate while maximum adhesion level is obtained within few days. Do not use for gluing on polystyrene. Do not apply on humid support. If the enviroment temperature is under 10 °C, favour the evaporation of the solvent
using a hot-air gun. The tools can be cleaned with acetone or methylethylketene.

Quantity per pallet or box, storage precaution & duration

Stocking period in original tank, sealed and at room temperature, 6 months

Sample request

  • This field is for validation purposes and should be left unchanged.